How to Use the Osuga Orushing Modular 5-in-1 Wand

By Freyaship Official | The Ultimate Pleasure Collection | Published: 2026-10-25

Category: How-to Guides

Learn step-by-step how to assemble, operate, and enjoy the Osuga Orushing Modular 5-in-1 Wand with suction, thrusting, and vibration functions.

Quick answer

Charge each module separately, attach the desired head (suction, thrusting, or bullet), and cycle through the 4 intensities and 5 frequencies to find your rhythm.

Why the modular design matters

The Osuga Orushing comes with three interchangeable heads: a suction head for air-pulse clitoral stimulation, a main thrusting wand for G-spot or prostate targeting, and a mini bullet for pinpoint vibration. Each module has its own 200mAh battery, while the main wand holds an 800mAh cell. This means you can swap functions without recharging the whole unit, but you must charge each attachment separately.

A common oversight is assuming the wand charges the attachments. They do not. Keep all three charging cables handy and top up each module after use to avoid mid-session power loss.

Choosing the right attachment for your goal

The suction head delivers air-pulse stimulation ideal for clitoral focus without direct contact. The main thrusting wand offers 440 thrusts per minute with an 8mm stroke, best for internal G-spot or prostate play. The mini bullet works well for external teasing or as a secondary stimulator during partnered use.

If you are new to thrusting toys, start with the wand on the lowest intensity and shortest stroke setting. The 8mm stroke is gentle enough for beginners but still noticeable.

Step-by-step guide

Charge all modules: Plug the main wand and each attachment (suction head, mini bullet) into their USB charging cables. A full charge takes about 2 hours for the main wand and 1 hour for attachments. The LED indicator turns from red to green when ready. Do not assume the main wand charges the attachments; each module needs its own cable.
Attach the desired head: Align the connector on the chosen head (suction, thrusting wand, or bullet) with the port on the main wand body and push firmly until it clicks. The modular connection is magnetic but requires a positive click for a secure fit. If the head feels loose, re-seat it; a poor connection can cause intermittent power loss.
Power on and select a mode: Press and hold the power button on the main wand for 2 seconds. Tap the mode button to cycle through 4 intensity levels and 5 frequency patterns (9 total per function). The suction head has its own separate button on the attachment; press it once to start air-pulse mode. Start on the lowest intensity and increase gradually—jumping to high can overwhelm sensitive areas.
Use the remote control for hands-free adjustments: Pair the remote by holding both the wand power button and the remote button for 3 seconds until the LED blinks twice. Use the remote to change modes, adjust intensity, or power off from a distance. If the remote does not respond, check that the wand is powered on and within 10 feet; re-pair if needed.
Clean after each use: Detach the head from the main wand. Wash the silicone parts with warm water and mild soap or a toy cleaner. Avoid submerging the electronic connectors; wipe them with a damp cloth. Let all parts air dry completely before storing. Never submerge the main wand or attachments in water—only the silicone surfaces are waterproof.

Product facts

Osuga Orushing Modular 5-in-1 Suction Thrusting & Vibration Wand: The main wand has an 800mAh battery; each attachment has a 200mAh battery. You need to charge each module separately, so plan your charging routine to avoid running out of power mid-use.
Osuga Orushing Modular 5-in-1 Suction Thrusting & Vibration Wand
Osuga Orushing Modular 5-in-1 Suction Thrusting & Vibration Wand: Thrusting speed reaches 440 times per minute with an 8mm stroke. The moderate stroke length makes it suitable for both beginners and experienced users who want consistent internal stimulation.